Добрый день. Такая проблема с РЛС VisionMasterFT. Она работают, видит объекты, но при попытке сделать захват - появляется сообщение что из за ошибки гирокомпаса это сделать нельзя. Я сэмулировал гирокомпас и данные по нему отображаются и зеленые - но ошибка все равно появляется. Еще есть специалисты по этим древним системам, кто может подсказать в чем может быть проблема? Спасибо!
If your heading signal is digital, you should verify that you are receiving an adequate amount of heading data. The baud rate must be 38400, and data should be received at a frequency of at least 10 times per second (configure your transmitter to 10 Hz and try and then to 50 Hz and try). By connecting an RS485/USB converter (instead of the radar's PCIO board), monitor the incoming data to determine its frequency and verify that the data is correct (consisting only of HDT or THS sentences) and valid (correct checksum). You can verify the checksum on one of these sites: https://nmeachecksum.eqth.net/ https://testbench.tools/tools/nmea-checksum/
You can post new topics in this forum You can reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You can attach files in this forum You can download files in this forum
Спасибо!
Share
The baud rate must be 38400, and data should be received at a frequency of at least 10 times per second (configure your transmitter to 10 Hz and try and then to 50 Hz and try).
By connecting an RS485/USB converter (instead of the radar's PCIO board), monitor the incoming data to determine its frequency and verify that the data is correct (consisting only of HDT or THS sentences) and valid (correct checksum).
You can verify the checksum on one of these sites:
https://nmeachecksum.eqth.net/
https://testbench.tools/tools/nmea-checksum/
Share